Initial tomato manufacturing process. Good morning and welcome. Today we are going to assume you are the customers who have come to the factory to learn about the tomato manufacturing process. I hope you will buy our products in the future after this presentation. This explanation is usually given to customers in the office of the scale truck. Today I will explain the things that we do in that part of the factory. That is where we get the tomato from the field, which always comes in fiberglass containers. These containers are numbered for the purpose of making the tomato traceability from being collected in the field until it is processed into the factory. When a truck arrives at the factory it is parked in the yard and the truck driver takes a delivery note to the office. This note includes all the information regarding the tomato. This information contains the number of the container or containers, the truck and the trailer number plate, and most importantly, the name of the farmer, the date and time at which the tomatoes were collected and the plot land where they were harvested. It is very important in order to make the tomato traceability. Later, the container is entered into the factory and is weighed on the scale. Then, a sample is collected to check the tomatoes quality. At that moment, the container passes to the unloading area, where it is unloaded with water. Finally, the empty container leaves the factory and is returned to weigh. All this process is registered in a document with a unique ID. In this document, we can see the date and time of arrival in the yard, the date and time of the entry, the date and time of the sample, the date and time of the unload and the date and time of the leaving. If any of you have any doubts do not hesitate to ask me anything.