Correcciones · 8
This part is too technical for me... @.@
I came up with 2 influential variables, die clearance and bottom die fillet radius
One is that the bigger clearance would result in a longer burr and less byproducts on the fracture area.
The other is that The smaller die fillet radius would result in a shorter burr.
Maybe you can say
I came up with 2 influential variables which are the size of die clearance and the radius of die fillet.
I set up 2 hypothesis.
The first one is that the bigger the clearance, the longer the burr generation and the lesser the byproducts on the fractured area.
The second one is that the smaller the die fillet's radius, the shorter the burr generation.
This is the Lemaitre damage model that is applied in this simulation.
There seems to be so many variables in this model at a first glance but those in a black box are the material constants obtained by tensile tests
It means the Variables are only equivalent stress and equivalent plastic strain.
This is the simulation boundary conditions for a straight line shaped punch.
It is 2 dimensional.
The material is Zircaloy, and its thickness is 0.5mm and length is 2mm
I repeated the simulations, changing die clearance from 0.005mm to 0.045mm
The number of mesh is 10000 which is verified by mesh test.
The Flow stress model is Johnson-cook model and the damage model is Lemaitre damage model
The quantitative definition of byproducts length is needed to compare each case. Hmm??
This is the simulation boundary conditions for 3d modeling.
First the punch shape would should be in a symmetric condition.
First of all, I’ll get started with the problems encountered during shearing process.
The next slide Next, it would be about the modeling and simulation results including mesh test and the relationships between variables and burr height.
The simulation modeling is divided into 2 parts
One is 2 dimensional model/modeling? for a straight line shaped punch
And the other is 3 dimensional model/modeling? for a convex and concave shaped punch.
This is the picture of a workpiece after shearing process.
There are 2 types of problems when shearing process is over.
The first one is the burr generation which is the formation of a rough edge on a workpiece at the bottom.
The second one is the by-products on the fractured area as you can see from the red circles in the picture.
As the punch goes up, some by-products are formed on the fractured area.
These 2 things lower the quality of a final product.
So my research purpose is to find out factors affecting burr generation and by-products on the fractured area.
and minimize thosethem.
The cross section of a punch is composed of several straight lines, convex and concave curves.
So, I’ll see how the burrs are formed in each case by simulation program which is based on FEA.
Ahh... So long...
¿Quieres avanzar más rápido?
¡Únete a esta comunidad de aprendizaje y prueba ejercicios gratuitos!
No pierdas la oportunidad de aprender un idioma desde la comodidad de tu casa. ¡Explora nuestra selección de profesores de idiomas con experiencia e inscríbete ya en tu primera clase!
Empieza a aprender hoy
