I need to make a presentation in English.2
I came up with 2 influential variables, die clearance and bottom die fillet radius
I set up 2 hypothesis.
One is that the bigger clearance would result in a longer burr and less byproducts on the fracture area.
The other is that The smaller die fillet radius would result in a shorter burr.
This is Lemaitre damage model that is applied in this simulation.
There seems so many variables in this model at a first glance but those in a black box are the material constants obtained by tensile tests
It means Variables are only equivalent stress and equivalent plastic strain.
This is the simulation boundary conditions for a straight line shaped punch.
It is 2 dimensional.
The material is Zircaloy, and it’s thickness is 0.5mm and length is 2mm
I repeated simulations, changing die clearance from 0.005mm to 0.045mm
The number of mesh is 10000 which is verified by mesh test.
Flow stress model is Johnson-cook model and damage model is Lemaitre damage model
The quantitative definition of byproducts length is needed to compare each case.
This is the simulation boundary conditions for 3d modeling.
First the punch shape would be in a symmetric condition.
The special thing is ‘d’ needs to be considered in the model to prevent the effect of wrinkles.
This idea is linked to a deep drawing case like the picture on the right side
There would be a critical value of ‘d’ that makes the burr height converge.
This is the simulation boundary conditions for 3d modeling.
First the punch shape would be in a symmetric condition.
The special thing is ‘d’ needs to be considered in the model to prevent the effect of wrinkles.
This idea is linked to a deep drawing case like the picture on the right side
There would be a critical value of ‘d’ that makes the burr height converge.
This is mesh test for the 2 dimensional model
10000 elements would be fine. More than 10000 elements results show that burr height is 0.014 on average.
Zoek tussen verschillende Engels docenten...
Correcties · 1
0
I need to make a presentation in English.2
I came up with 2 influential variables: die clearance and bottom die fillet radius.I set up 2 hypotheses.
One is that the bigger clearance would result in a longer burr and fewer byproducts on the fracture area.
The other is that the smaller die fillet radius would result in a shorter burr.
This is the Lemaitre damage model that is applied in this simulation.
There seems to be so many variables in this model at a first glance, but those in a black box are the material constants obtained by tensile tests.
It means that the variables are only equivalent stress and equivalent plastic strain.
This is the simulation of boundary conditions for a straight line-shaped punch.
It is 2-dimensional.
The material is Zircaloy. Its thickness is 0.5mm and its length is 2mm.
I repeated simulations, changing die clearance from 0.005mm to 0.045mm
The number of the mesh is 10000 which is verified by a mesh test.
The flow stress model is the Johnson-Cook model and the damage model is the Lemaitre damage model.
The quantitative definition of byproducts length is needed to compare each case.
This is the simulation of boundary conditions for 3d modeling.
First, the punch shape would be in a symmetric condition.
The special thing is that ‘d’ needs to be considered in the model to prevent the effect of wrinkles.
This idea is linked to a deep drawing case like the picture on the right side.
There would be a critical value of ‘d’ that makes the burr height converge.
This is the mesh test for the 2-dimensional model
10000 elements would be fine. More than 10000 elements results show that burr height is 0.014 on average.
This is really good! You may have already given the presentation, but maybe this will help in some way in the future.
Wil je sneller vooruitgang boeken?
Word nu lid van deze leer-community en probeer de gratis oefeningen uit!
Don’t miss out on the opportunity to learn a language from the comfort of your own home. Browse our selection of experienced language tutors and enroll in your first lesson now!
Start Learning Today
