Szukaj różnych nauczycieli angielski...
Posty
What is success
Today I am very glad to be here to share with you my ideas of success. What is success? At first, what does success mean? Some people define success as being financial successful as same as Bill Gates. Some people will define success as having a power as same as Donald Trump. Some people will define success as having a happy family life. Some people will define success as getting a promotion as same as Daniel Zhang. I think most people think they are successful. But does the success can be copied? The answer is no.
So how to get the suucesee? I think living in the present.
In my last job, we were working with our America colleagues together. At the start, I were always complained by them, they said, your drawings were poor, no geometric tolerance, no datum, no tolerance stack up, no verification and validation, and etc., At that time, I was a bit depressed, I think my colleague was depressed also. We were all feeling a bit depressed as we were all feeling the pressure. To improve the moral… I hard study the American standard Y14.5. I did the drawing again and again, review the drawing many times. They helped us get to the root of the problem, how to build a systematic method to do the R&D work. And at the same time, I’m very lucky to a get training that was held by the general company. Two coaches help and review my project. During the process, I got a lot. I study how to analyze the customer's need, concept design, DOE, MSA and so on. Finally, I finished this project and improved our quality. And also I got a certificate from the president and I got his acknowledgment. I was the second people get the certificate in our company. In a word, I just want to say you can get success in you present position.
On our way to success, we should hardworking, Rome was not built in a day. Don’t easily to give up, we will face difficulties. You should always continue studying. Catch every opportunity. Finally, it is important for you to get along well with your co-workers, care for each other and help each other. If you follow these principles, you will certainly achieve remarkable success in the future.
What is success? Everyone has his own interpretation as I do. But I am sure every success leads to an ever-brighter future. So ladies and gentlemen, living in the present. And belive in ourself, we, every one of us, can make a successful life!
Wish you all good success!
0
0
New employee orientation
On Oct.19 to 20, I take part in orientation training in Microport Medical. This is a memorable training that I had experienced. During the time, we learned company culture, rules, personal system, financial system, product knowledge, and compliance requirements. We also spent half a day on expansion training.
MicroPort is focused on covering 10 major areas with various subsidiaries and over 300 devices and technologies. Our vision is People-Oriented. Building a People-Centric Consortium of companies focused on Emerging Medical Technologies. Our mission is continuous innovation. Providing access to the best means of prolonging and reshaping lives.
At MicroPort we firmly believe that every person has the right to high-quality medical treatments and to live longer and healthier lives. That belief drives us to seek partnerships and collaborations with doctors and medical societies to foster innovation that could transform medical treatment. Together we are working to ensure that everyone can enjoy this right and can thrive beyond 115 years.
In the course of training, the organizer gave us interesting games and competitions. We can score by answering the first question. These actives not only help us remember but also meet new colleagues.
On expansion training, 67 people were divided into six groups. Every team got the task and try to finish it by the power of the team. In this part, no one cares about personal gain or less, coordinates and cooperates tightly, strengthens the team spirit and team cohesion.
0
0
Farewell letter
Hi Everyone,
It is with mixed emotions that I send this email. Tomorrow is my last workday in Kanghui and I want to bid my farewell to you all.
I am more than happy can work with you together in the past seven years. I’d like to take this opportunity to express my sincere thanks to you all for your great support, understandings, cooperation and helps during my time here. Even though I will miss my colleagues and the company, I am looking forward to this new challenge and to starting a new phase of my career.
Please keep in touch: I can be reached at my personal email address ([email protected]), or on my Wechat/cell phone (xxxxxxx).
Thanks again for everything. I wish you all the best.
Best regards,
Oscar
3
0
answer an Email
Daniel,
Many thanks for your suggestion, that is very enlightening and diligent work for us. I have some thought as follow:
1. A small gap between the hex shaft and the shaft it looks more terrible than now. I still prefer the status quo. But for now, this gap can’t affect the function of the screwdriver.
2. It will increase the difficulty of machine the hex hole. By the way, the more precision of the hex, the better straightness of two shafts. In fact, it’s hard to machine the Hex transition fits.
3. It’s hard to match drilled the hole at assembly. The hardness of 465 SS is 46-54HRC, H950, larger than 17-4 material. That will need to customize drill bit and reamer. At the same time, the drill bit breaks easily. It's best to machine the pin-hole before assembling it.
4. If both components were changed to titanium, the cost will increase. Reduce the weight by 2 - 3 ounces (60 - 100 grams) that will similar with our launched drivers.
Thanks,
Oscar
中文(Chinese)：
Daniel,
非常感谢你的建议，那是非常有启发和勤奋的工作对我们来说，我有一些想法如下：
1. 两个杆子之间的小间隙看起来比现有的间隙更糟糕，我还是倾向于保持现状，目前的gap就如上次所说至少对功能无影响。
2. 将会增加六角孔加工的难度，六角孔的配合精度越高，两个杆子的直线度越好，但是事实上，很难实现六角孔的过渡配合。
3. 很难在装配的时候配作销钉孔，465材料的硬度在46-54HRC，H950, 大于17-4材料的硬度，需要定制钻头和铰刀，同时，这个钻头还很容易折断，最好是能在装配前把销钉孔加工好。
4. 如果两个部件都改为钛合金成本将会增加，减少60-100克后和我们已上市的起子接近
0
0
self-evaluation
With my 6 years experience in Spine, Trauma and Joint. From a freshman to be a true engineer. In the past 6 years, improved my machining process knowledge, verified the ability of design and drawing, studied the orthopedic surgical. In the same time, enhanced my Knowledge of medical device regulations. Improved my management skills for programs and projects. I want to study continually, want to be a knowledgeable engineer or even a manager.
2
0
Work Experience
Conducted design optimization manufacturing reviews, design verification and tolerance analysis.
Supported Quality Assurance in technical investigations of product complaints and change it.
Supported in Market department assement the new project, Design the product prototype and production validation, assist the registration department to complete the registration of new products, push the new project to lunch.
Responsible for new product that transform from Medtronic to Kanghui manufacturing and registered
Resposible:
Design and develop the relative implants and instruments of the spine;
To improve the surgical instruments or the current products based on the customer’s complaint or the doctor’s need.
To verify the materials, process, structure and function of the new products, and solve the problem in the phase of trial-manufacture.
Support RA team on the product registration, finish the DHF file.
Assist the Marketing Department to complete the product project, put the new product to launch.
To transform the drawings from MDT and further prepare the trial production process, Finish the production and assist the RG
2
0
Self instruction
The working experience in orthopedic medical, nearly five years, make me know some relevant industry standards and risk management. By mastering the working knowledge of the product‘s processing technology, can solve the problems in the manufacturing. Familiarity with the products of the Spine, Trauma and joint. Serious and responsible, doing things right in the first time is my beliefs and goals.
Specialties:
skilled technical ability to development surgical set and implantable medical device in trauma, spine and joint products.
Can recommend, design, select machinery, tools, jigs, and fixtures required to the products.
Can draw up a product routings and bills of material in the MRP system.
Be familiar with the AUTOCAD, UG, Core2 and MASTCAM.
Can design, drawing and operate the CNC machine.
2
0
A Hard year for KangHui in 2017
I always think about whether I need to change a job these days. It is nearly five years I working in KangHui. Maybe the promotion opportunity is less. And the same time, the operating cost will bigger and bigger. Our company will not finish the profit rate that set from head office in two or three years.
This year, our company have a little pay rise. Much welfare was cut. The celebrating the spring festival activities were canceled. Maybe it's a hard year for KangHui in 2017.
2
0
Te treści naruszają Wytyczne dot. Społeczności.16 grudnia 2016
4
0
ON SATURDAY
Last Saturday, I got up early and went to hospital join a Medical examination. Every year our company will organize the examination. There were not many people when I arrived. So I only spend about one hour to finish the examination. After I had breakfast in the hospital, I went to the office.
There were many people working in the office. As an R&D engineer, we spend a long time on every project in the R&D department. Every project will start from customer need to end launch. The process included design, manufacturing, verification, validation, registration and ready to launch. I spend about 7 hours in the office on Saturday. I went home after work.
After had dinner, I took care of my daughter. She was pleased to play the toy horse. At 9 pm, she went to sleeping. Then, I washed my face, brushed my teeth and went to sleep.
Before I go to bed, I watched a new movie named Pairs Crisis. It’s said a Cia agent and a thief together to break a big conspiracy.
How busy a day!
1
0
Pokaż więcej
