Correzioni · 2
Instructions for a job - part 2
• To update the speakers and headphones :
o Ask help from a salesperson to put the display on the floor
o Unscrew the bottom of the dispay (you will have nothing to do with it for the moment but it will be usefull later to update the wires and headphones)
o Unscrew the white plastic on the top of the display (beside the speakers) See pic 3.
o Cut the security wire to have more space and be able to remove the white plastic. See pic 4.
o Unscrew the back of the white plastic to release the speakers. Keep the screws.
o On the new speakers, remove the rubber part to remove the little screws. These are too small and you will need to use the old screws (the ones that you removed from the old speakers) to fix the new speakers to the white plastic
o Make sure to screw the new speakers to the white plastic to secure them.
o You don't need to use the new wires that comes with the new speakers, you can use the old wires and don't move anything. Only the yellow wire from the xxx speaker need to be updated because it is bigger.
o When you will screw the new xxx speaker on the white plastic, it might not fit the place of the old speaker. Make sure it is alligned and just put one or two screw if it's not possible to put the other ones back.
o The headphone installation is done by the bottom of the display (the one that you unscrew at the beginning) - See detailled instructions in the bag with the headphones
o Make sure everything is plugged in and working
o Ask help from the salesperson to put the display back on the shelf
o Examples of a good installation : pic 7 et 8
o Don't forget to change the graphic as well. See examples of a good graphic installation : pic 9,10,11
Vuoi progredire più velocemente?
Unisciti a questa comunità di apprendimento e prova gli esercizi gratuiti!
Non perdere l'opportunità di imparare una lingua comodamente da casa tua. Esplora la nostra selezione di insegnanti di lingue esperti e iscriviti subito alla tua prima lezione!
Inizia a imparare oggi
